Wood dowel cutter
With this hand tool you can easily produce dowel bars from D=6 to 26 mm in millimeter increments from the solid woods you use. As raw material you need a 6 or 8-sided bar. This is driven by a driver sleeve for e.g. an oblong hole drilling machine or a drilling machine and milled round by the hand milling device with a corresponding diameter sleeve. For long rods up to 1 m, the rod is guided by hand. Due to the fine adjustment of the cutter, diameter undersizes or oversizes up to +/- 0.2 mm are possible.
Please assemble the device you need accordingly. For the basic device you need at least one diameter sleeve and the corresponding driver.
Diameter sleeves are available in the following sizes: D=6/7/8/9/10/11/12/13/14/15/16/17/18/19/20/21/22/23/24/25/26 mm
We ask for your understanding that we can procure spare parts for this device only for devices purchased from us. Exception only if the value of the spare parts is at least 100 Euro without VAT.